| English | 선택 | |
| 한국어 | 선택 | |
| Русский | 선택 |
(주)태광메카텍
Crane Lifting
모델
-
시리즈
Plant Part
제품 소개
Merit of Climber Lifting tower compared others equipment
Merit
1.Climber lifting tower is free to swaying during lifting.
2.Climbing block as consisted one body prevent trouble during lifting.
3.Equalizing function of Jacking system is possible easy distribution of lifting loads.
4.Climbing block is possible easy repair to trouble during lifting, repair time take min. one day.
Because emergency block support all deadweights of hoisting object at climbing block's replacement.
Erection tower main specification
| Item | Description | Remarks | |
|---|---|---|---|
| Lifitng capacity | 6500 ton | 4Masts | |
| Max. capacity | 8500 ton | ||
| Design wind speed | Operation | 15 m/sec (Max. wind speed 20 m/sec ) | |
| Storm | 55 m/sec | ||
| Mast max. height | FL+132M | ||
| Lifting Height | FL+120M | ||
| Jacking unit capacity | 710 ton/unit | 4Cylinders/unit (2Cylinders for jacking, 2cylinders for equalizing) | |
| Control method | Manual(Local panel) & remote control | ||
| Capactiy analysis for steel member | ASCE/SEI 7-05 code | ||
| Erection application items | 1) Goliath gantry crane | ||
| 2) Heavy weight steel sturcture | |||
| 3) Bridge | |||
| 4) Tower & reactor in chemical facilities | |||
Hydraulic system main specification
| Item | Description | Remarks | |
|---|---|---|---|
| Hyd.Jack | Operating pressure | 290 bar | 1. Jack ascend & descend 2. Weight balance |
| Max. pressure | 350 bar | ||
| Stroke | 0 ~ 350 mm | ||
| Capacity | 300 ton | ||
| Action | 균분압 | ||
| Ascend velocity | 0.5cm/sec | ||
| Descend velocity | 0.07cm/sec | ||
| Hyd.Unit | Pump type | Piston | 1. Hyd. Jack control |
| Extraction pressure | 350 bar | ||
| Cooling system | Fan motor type(air cooling) | ||
Merit of climber lifting tower compared others equipment
생산 제품
Plant Part
방산 부문
지대공유도무기 천마(POWER UNIT 정비부문)
비호PPU(POWER UNIT 정비부문)
KAAV7A1 포탑구조물(방산부품 부문)
자주대공포 비호(POWER UNIT 정비부문)
창정비 부문
K-SAM 1(천마) 단거리 지대공 유도무기(POWER UNIT 정비부문)
K2전차 부품(방산부품 부문)
K-30(비호) 30MM 자주대공포(POWER UNIT 정비부문)
함포용 SHIELD 제작
K56탄운차 컨베어장치(방산부품 부문)
K9 자주포 차체/포탑 부품(방산부품 부문)
구난전차 부품(방산부품 부문)
천마 PPU(POWER UNIT 정비부문)
조선해양 부문
발전설비 부문
각종 VALVE제작 부문
대형가공부문
절단 부문
열처리 부문
도장 부문
Turbines Part
Offshore Plant Business
Plant Part(Press)
2000 Ton Press ASSY Production, installation, commissioning(Seojin Industrial Ansan Factory)
Main Gear
Clutch for 100ton press
Tandem Press Line
Drive Pinion Gear
Tandem Press Line+Automation
Crown for 800ton Press
Plant Part(Power Plant)
Plant Part(Environmental Industry)
Plant Part(Crane)
Plant Part(Steel Marking)
Transfer car
Line Shaft Table
Looper for CGL
Grinder Charging Table for Billet
Deburring Device
Hot Leveller
Plant Part(Large Machining)
Plant Part(Overseas Assoclate)
Steel Making Equipment
Coal Handing System
Hoisting & Conveying
Back-up Rolls, Work Rolls
Press & Forging Facilities
Plant Part(Storage Tank)
