| English | 선택 | |
| 한국어 | 선택 | |
| Русский | 선택 |
이노켐
우레탄 및 기타
모델
-
시리즈
INO 제품군
제품 소개
CR ADHESIVE
| 제품명 | 주성분 | 점도(CPS/25℃) | 외 관 | 용 도 | 특 징 |
|---|---|---|---|---|---|
| IR-5050 | C.R | 400-500 | Yellow | Various material | Good in early Fixation |
| IR-1700SP | C.R | 900-1,000 | Red | Hard Board/ PP, PE | Single Side coating |
| IR-1705SP | C.R | 400-500 | Red | ABS (CLOTH) | Good heat-proof |
| IR-2000 | C.R | 900-1,000 | Yellow | PVC, PE | Adhesive at normal temp |
| IR-2000R | C.R | 900-1,000 | Yellow | Various material | Good in early Fixation |
| IR-1800U | C.R | 400-500 | Yellow | Wood, Wooden Board | Good in early Fixation |
| IR-1880U | C.R | 300-400 | Yellow | Wood, Wooden Board | Good heat-proof |
| IR-900U | C.R | 8,000-10,000 | Yellow | Acryl, EVA, Soft PVC | Good in early Fixation |
PU ADHESIVE
| 제품명 | 주성분 | 점도 (CPS/25℃) | 외 관 | 용 도 | 특 징 |
|---|---|---|---|---|---|
| IU-120A | P.U | 400-500 | Green | PP, PE, Hard Board | Early adhesive power |
| IU-150A | P.U | 1,000-1,500 | Green | Glass wool (PVC) | Good heat-proof |
| IU-140A | P.U | 700-800 | Red | Resin board (PE Foam) | Wide adhesive |
| IU-109A | P.U | 500 | Transparent | PVC, PE, PP | Early adhesive power |
| IU-900A | P.U | 500 | Transparent | PVC, PP | Good adhesive to PP |
| IU-1500U | P.U | 1,500-2,000 | Dark Brown | Honey comb, Rock Wool | Wide application |
| IU-1700U | P.U | 7,000-8,000 | Dark Brown | Panel (sandwich.steel) | Adhension, Good cohesion |
| IU-104U | P.U | 2,000-3,000 | Light Yellow | Wood, MDF/PU Foam | Good productivity |
SOLVENT FREE TWO PART URETHANE
| 제품명 | 점도 (CPS/25℃) | 가사시간 | 경화시간 (23℃) | 내열도 | ||
|---|---|---|---|---|---|---|
| Resin | Hardener | 초기 | 실용 | |||
| PG-601 | Paste | 150-250 | 30min | 2hr | 72hr | 120℃ |
| PG-9400 | 26,000 | 10,000 | 2-3min | 20min | 24hr | 170℃ |
| PG-7779 | 15,000 | 13,000 | 10min | 60min | 24hr | 220℃ |
SOLVENT BASE HOT MELT
| 제품명 | 건조 시간 | SOFTING POINT | 피착 재질 |
|---|---|---|---|
| IP-215 | 120℃x3min | 140-160℃ | PP, PE, ABS, PVC, etc. |
| IP-217 | 120℃x3min | 220-240℃ | PP, PE, ABS, PVC, etc. |
| IP-230 | 120℃x3min | 120-140℃ | PP, PE, ABS, PVC, etc. |
| IP-639 | 120℃x3min | 100-110℃ | PP, PE, ABS, PVC, etc. |
| IP-1639 | 120℃x3min | 120-130℃ | PP, PE, ABS, PVC, etc. |
ADHESIVE MATERIAL PRE-TREATMENT AGENT
| 제품명 | 건조 조건 | 활성 유지시간 | 피착 재질 |
|---|---|---|---|
| IP-115 | Room temperature | 24hr | ABS, EPDM, PE, PP, etc. |
| IP-116 | Room temperature | 24hr | Metal, Glass, Olefin Plastic |
| IP-117 | Room temperature | 24hr | Metal, Glass |
생산 제품
