Applications
-Fire-retardant sealing for cables
-Fire-retardant sealing for PVC, PP-R & PB pipe
-Water and gas-proof sealing for electronic & wiring elements

Features
-Fire rating: A-60 & H-120 class
-Excellent intumescences and heat absorption
-High elasticity and high tensile strength
-High bonding strength
-Gas and water tightness
-UV light and ozone resistance
-Variety of sizes, which conform to all wiring standards
-No negative changes in repelling cold and heat

Specifications

Total drying time	120 hours (20mm)
Surface drying time	1~2 hours
Service temperature	-55°C ~ 180°C
UV test	Grade 5, (40±1)℃, 24 hours
Cold shock	No crack, (-55±1)℃, 3 minutes
Service life	More than 50 years

Silicone Sealant RS-105

Remitite Silicone Sealant RS-105 is a fire and water resistant sealant based on a single component compound.
It is an adaptable and flexible product that can be used in many different applications, jointing between building elements and materials, especially in shipping and offshore plants..

Specifications

Color	Dark gray
Total drying time	120 hours (20 mm)
Surface drying time	1 ~ 2 hours
Capacity	Cartridges containing (310 ml)
Storage life	12 months
Service life	More than 50 years
Service temperature	-55℃ ~ 180℃
Tensile failure	80%
Storage temperature	Room temperature
UV test	Grade 5 (40±1)℃, 24 hours
Cold shock	No crack, (-55±1)˚C, 3 minutes

Limitations
-Cannot be overpainted.
-Not intended for structural glazing.
-Do not allow sealant to come in contact with solvent during cure.
-Do not allow sealant to come in contact with curing polyurethane sealants during cure.
-Not intended for immersion.
-Sealant may be applied below freezing temperatures if substrates are completely dry, frost free and clean.
-Contact Technical Service for more information.
-Do not apply when substrate temperatures are below -20°F or above 130°F.
-Not recommended for absorptive surfaces such as natural stone, particularly limestone or marble where staining may occur test before use.
-Brass or copper may be discolored. Test prior to application.
-Do not apply to surfaces that will be painted as sealant surface will not hold paint
-Do not apply to substrates that bleed oil, plasticizers or solvent.
-Do not apply to damp or wet substrates.
-Lower temperature and humidity will extend tack free and cure rates.
-Test sensitive substrates, such as mirror backings, for compatibility before use.

Caution
- Direct eye contact may cause irritation.
- Eye contact may cause conjunctivitis,corneal damage, or severe chemical burns.
- May cause skin irritation and sensitization.
- May be harmful if swallowed
- Product contains oximes, possible skin sensitizers.