HOTMELT | INOCHEM

HOTMELT

Model

Series

HENKEL PRODUCTS

Product Description

Henkel’s hotmelt products are ideal for bonding automotive interiors and laminating fabrics, and can be applied in a variety of ways depending on the material of the interior and the fabric.

FEATURE

- Hotmelt type adhesives are solid state adhesives mainly composed of thermoplastic resins and elastomers, which are melt-mixed adhesive
agents, plasticizers and antioxidants.
They are generally used without solvents and have a fast bonding speed and can be used in automobiles.

APPLICATION

- Assembling and adhering of automobile interior parts – Door trim, Head liner, Instrument panel

- Automotive interior fabric laminating – Sheet Headliner, Door trim.

PRODUCT

- Rubber Hotmelt

- EVA Homelt

- UrethaneHotmelt

- Polyamide Hotmelt

- Polyolefin Hotmelt

- Water-soluble adhesive

	SYNTHETIC RUBBER			POLYURETHANE			POLYOLEFIN
Product	Terokal 1251	Terokal 1257	Terostat 971	Terorehm MC 9622-02	Terorehm MC 9340	Macroplast QR 4633	Hysol 3650	Hysol 3651
Chemical	Synthetic rubber	Synthetic rubber	Rubber	Reactive polyurethane	Reactive polyurethane	Reactive polyurethane	Polyolefin	Polyolefin
Features	- Excellent heat resistance - High adhesion strength in various materials	- Excellent heat resistance - High adhesion strength in various materials	- Excellent UV Resistance - Excellent water resistance	- Excellent heat resistance - High softening point over 100℃ - Fast hardening time (Suitable for Edge wrapping) - Spray or full coating possible - High initial adhesion after solidification	- Spray or full coating possible - High initial adhesion after solidification - High softening point over 100℃ - High flexibility at low temperatures	- Long open time allows re-bonding after cooling - Very good flexibility	- Low viscosity - Middle level Open time	- Long open time - Excellent heat resistance
Application	- Textile, Membrane (PE foam, rigid PVC etc.), Felt, Coating of metal etc. (pressure sensitive coating)	- Textile, Membrane (PE foam, rigid PVC etc.), Felt, Coating of metal etc. (pressure sensitive coating)	- Good adhesion performance to Glass, aluminum - Adhesion and sealing of insulating glass	- Bonding of automotive interior parts - Fabric lamination	- Bonding of automotive interior parts - Fabric lamination	- Joint parts requiring strong adhesion - Various materials Adhesive and industrial laminating (wood, fabric, film, foam, etc.)	- Adhesion and coating of polypropylene or polyolefin material which does not require high temperature	- Adhesion and coating of polypropylene or polyolefin material which does not require high temperature
Colour	Yellow	Dark ivory	Black	Light ivory	Light ivory	Light ivory	Light beige	Light beige
Smell	-	-	Odorless	Weak	Weak	Weak	Weak	Weak
Density, g/㎠	about 0.95	about 1.0	about 1.14	about 1.2	about 1.18	about 1.23~1.23	-	about 0.983
Viscosity mPA.s(cP)	15,000(at 170℃)	15,000~25,000 (at 170℃)	High viscosity	30,000±80,000 (at 150℃)	6,000~15,000 (at 130℃)	5,000~13,000 (at 180℃)	25,000~33,000 (at 180℃)	75,000~125,000 (@180℃, ASTM D3236-88)
Molten state (℃)	150~170	180~210	170~190	110~150 (Maximum 160℃ Short-time exposure possible)	110~140 (Maximum 160℃ Short-time exposure possible)	110~140	180~200	180~200
Service temperature range (℃)	-40~80	-40~100	-40~80 (160℃ 1 hour exposure possible)	-40~120 (130℃ 1 hour exposure possible)	-40~120 (130℃ 1 hour exposure possible)	-	Softening point 115~125	Softening point 151~161
Curing start time	-	-	-	10±5sec	60±15sec	4~8min	60~80sec	80~100sec