EPOXY ADHESIVE

Model

Series

INO PRODUCTS

Product Description

POTTING & MOLDING EPOXY

PRODUCT	MIXING RATIO		HARDENIN TYPE	FEATURES
-	RESIN	HARDENER	-	-
IPT-1025	100	70	25℃x12hr	General Usage, Excellent workability
IPT-1026	100	100	5℃x24hr	High elasticity, Good adhesion, Superior chemical resistance
IPT-1081	100	50	80℃x0.5hr	Impact resistance, Excellent leveling, Sensor charging
IPT-1082	100	50	80℃x1hr	High bending, Low temperature shock resistance, Excellent impact resistance
IPT-1120	100	100	120℃x2hr	Flexible type, Resistant to low temperature and external impact

TWO-LIQUIDS TYPE STRUCTURAL ADHESIVE

Adhesion is caused by room temperature curing or heat curing. It is possible to design according to customer’s specification which is variously demanded.

PRODUCT	MIXING RATIO		HARDENING TYPE	FEATURES
-	RESIN	HARDENER		-
INO-300	100	100	25℃x10min	Fast curing type, Good adhesion
INO-310	100	100	25℃x72hr	Aluminum, Metallic material, Hard-to-adhere material
INO-310	100	100	25℃x72hr	Aluminum, Metallic material, Hard-to-adhere material
INO-320	100	50	25℃x72hr	Excellent abrasion resistance, heat resistance and durability
INO-4010	100	100	25℃x72hr	Excellent impact resistance, heat resistance and chemical resistance
INO-4050	100	50	25℃x72hr	Excellent plasticity, bending property, impact resistance

ONE-LIQUID TYPE STRUCTURAL ADHESIVE

One-liquid type structural adhesive is is a product that is ready to use immediately without any process such as mixing and weighing because it is mixed with a resin and a hardener. It is easy to use.

PRODUCT	MIXING RATIO		HARDENING TYPE	FEATURES
-	RESIN	HARDENER	-	-
IPT-1025	100	70	25℃x12hr	General Usage, Excellent workability
IPT-1026	100	100	5℃x24hr	High elasticity, Good adhesion, Superior chemical resistance
IPT-1081	100	50	80℃x0.5hr	Impact resistance, Excellent leveling, Sensor charging
IPT-1082	100	50	80℃x1hr	High bending, Low temperature shock resistance, Excellent impact resistance
IPT-1120	100	100	120℃x2hr	Flexible type, Resistant to low temperature and external impact